OEM Series® Rear Wheel Bearing Kit – Husqvarna, Sherco, SWM | RWK-Q-011

RUEDA

Factory Links OEM Series® Rear Wheel Bearing Kits are engineered to handle the higher torque loads, sustained radial stress, and heat exposure experienced at the rear hub of off-road, enduro, dual-sport, and motocross motorcycles. Designed to meet or exceed OEM specifications, each kit includes premium deep groove ball bearings and Nitrile Butadiene Rubber (NBR) double-lip oil seals—manufactured to strict dimensional tolerances to ensure proper axle alignment, drivetrain stability, and smooth rear wheel rotation under power. Unlike generic aftermarket replacements, Factory Links rear wheel bearings are packed with a heavy-duty marine-grade grease and specialized thickener blend formulated to resist grease breakdown under high load, chain tension, and elevated operating temperatures. Rear wheel bearings endure continuous drive torque from the chain and sprocket assembly—placing greater demand on load capacity and seal integrity than front wheel applications. Our bearings are engineered specifically to withstand these forces while maintaining smooth rotation and long service intervals. Every kit includes all components required for a complete rear wheel hub rebuild—including bearings, oil seals, and model-specific spacers (where applicable)—to eliminate wheel play, restore drivetrain precision, and extend service life in mud, water, sand, and extreme off-road environments. For exact compatibility, refer to the Fitment tab or use our Year/Make/Model search tool. Technical Details HEAVY-DUTY BALL BEARINGS Factory Links OEM Series rear wheel bearings are manufactured to DINP6 – ABEC3 standards and developed specifically for high-load motorcycle rear hub applications. Precision-ground races for smooth and consistent rotation under torque Optimized internal clearances to accommodate sustained radial load High-grade bearing steel for long-term durability Designed to handle chain tension, acceleration forces, and sprocket-side stress Rear wheel bearings operate under continuous drivetrain load—our internal tolerances are engineered accordingly to prevent premature wear and overheating. OFF-ROAD SPECIFIC OIL SEALS Each kit includes premium NBR double-lip oil seals designed to: Prevent intrusion of water, mud, sand, and debris Retain grease under sustained rotational load Resist contamination from chain lubricant and road grime Maintain sealing integrity under elevated temperatures These seals are purpose-built for off-road motorcycles—not industrial substitutes. MARINE-GRADE HIGH-LOAD GREASE FILL All Factory Links OEM Series rear wheel bearings are pre-packed with a high-performance marine grease featuring: Enhanced moisture resistance Superior rust and corrosion protection Improved shear stability under high torque Extended lubrication intervals This increased grease durability helps reduce premature failure caused by heat buildup, frequent washdowns, and harsh off-road riding conditions. FAQs Q: How do I know if my rear wheel bearings are worn?A: Common signs include lateral wheel play at the axle, grinding noise under acceleration, rough rotation when spinning the wheel, excessive sprocket movement, or visible contamination during inspection. Q: Does this kit include seals and spacers?A: Yes. All OEM Series Rear Wheel Bearing Kits include bearings and oil seals required for complete service. Many applications also include model-specific spacers where required. Q: Why are rear wheel bearings different from front bearings?A: Rear wheel bearings must withstand continuous drive torque from the chain and sprocket assembly, higher sustained loads, and increased heat exposure—requiring optimized internal clearances and enhanced grease durability. Q: Is this kit suitable for motocross, enduro, and dual-sport use?A: Yes. These kits are designed specifically for high-load off-road applications where drivetrain stability, contamination resistance, and durability are critical. Q: Do I need special tools for installation?A: Proper installation typically requires a bearing driver or press tool to avoid damaging the hub or applying force through the rolling elements. Install bearings squarely, verify spacer alignment, and ensure correct seal orientation for optimal performance. Fitment Kit / Fitment Wheel Bearing kit Manufacturer HUSQVARNA Model CR 125 (2000-2013) REARCR 250 (2000-2004) REARSM 400 R (2005-2007) REARSM 450 R (2005-2007) REARSM 450 RR (2008-2009) REARSM 510 R (2005-2007) REARSM 530 RR (2009-2009) REARSM 610 (2006-2008) REARSMR 450 (2008-2010) REARSMR 510 (2008-2010) REARSMS 630 (2010-2011) REARTC 250 (2004-2013) REARTC 450 (2004-2013) REARTC 510 (2004-2009) REARTE 250 (2004-2012) REARTE 310 (2009-2013) REARTE 450 (2004-2013) REARTE 510 (2004-2013) REARTE 511 (2012-2013) REARTE 610 (2004-2009) REARTE 630 (2010-2011) REARTXC 250 (2009-2012) REARTXC 310 (2012-2013) REARTXC 450 (2009-2013) REARTXC 510 (2009-2013) REARTXC 511 (2012-2013) REARWR 125 (2000-2013) REARWR 250 (2000-2013) REARWR 300 (2008-2010) REAR Manufacturer SHERCO Model 125 SE FACTORY (2020-2023) REAR125 SE-R SIX DAYS (2018-2018) REAR125 SE-R+ (2018-2018) REAR2.5 FACTORY (2010-2010) REAR2.5 I (2011-2013) REAR2.5 I ENDURO (2008-2013) REAR2.5 I F-R (2011-2011) REAR2.5 I R (2012-2013) REAR2.5 I-F (2013-2013) REAR250 I ENDURO (2009-2009) REAR250 SE (2014-2016) REAR250 SE FACTORY (2023-2023) REAR250 SE SIX DAYS (2015-2018) REAR250 SEF (2014-2016) REAR250 SEF FACTORY (2019-2023) REAR250 SEF RACING (2014-2016) REAR250 SEF RACING (2021-2021) REAR250 SEF SIX DAYS (2015-2018) REAR250 SEF-R (2017-2018) REAR250 SEF-R FACTORY (2019-2019) REAR250 SEF-R RACING (2020-2020) REAR250 SE-R (2017-2018) REAR250 SE-R RACING (2019-2022) REAR250 SE-R+ (2018-2018) REAR300 SE FACTORY (2023-2023) REAR300 SEF FACTORY (2023-2023) REAR300 SEF-R (2014-2022) REAR300 SEF-R FACTORY (2014-2022) REAR300 SEF-R SIX DAYS (2016-2022) REAR300 SE-R (2014-2022) REAR300 SE-R FACTORY (2014-2022) REAR300 SE-R SIX DAYS (2015-2022) REAR450 SEF FACTORY (2023-2023) REAR450 SEF-R (2014-2022) REAR450 SEF-R FACTORY (2016-2022) REAR450 SEF-R SIX DAYS (2016-2022) REAR500 SCF (2019-2020) REAR500 SEF FACTORY (2022-2023) REAR500 SEF RACING (2021-2021) REAR500 SEF-R RACING (2019-2021) REARENDURO 4.5 I (2004-2008) REARENDURO 4.5 I FACTORY (2007-2008) REARSE 250 IF (2010-2010) REARSE 250 IF-R (2010-2010) REARSE 3.0 I-F RACING (2010-2013) REARSE 300 I-F (2010-2013) REARSE 4.5 I-F (2009-2013) REARSE 4.5 I-FR (2010-2011) REARSE 450 I-R (2012-2013) REARSE 5.1 I-F (2007-2011) REARSE 5.1 I-FR (2010-2011) REARSE-R 125 (2018-2019) REARSM 4.5 I (2004-2008) REARSM 5.1 I (2007-2008) REAR Manufacturer SWM Model RS 300 R (2015-2026) REARRS 500 R (2015-2026) REARSM 500 R (2015-2026) REAR